Skip to content
LSLab

What Is Solar Self-Consumption?

  • Starter
  • Article
  • Ages 10+
  • 7 min read
Rooftop solar panels, a wall-mounted home battery and a washing machine in a utility room.

Solar self-consumption means using your own solar electricity on-site, directly for appliances at home or through a battery for later. Electricity sent to the grid for credits on a bill does not count as self-consumption. The self-consumption level shows how much of the solar electricity is used on-site.

Contents
Electricity used at home is self-consumption; only the surplus goes out to the grid.
  • Rooftop panels
  • Appliance using the power directly
  • Grid pole (the surplus)

What you will learn

Before you start

No prior knowledge needed. It is enough to know that solar panels on a roof make electricity when the sun is out.

What is solar self-consumption?

It is using the very electricity you make, on the spot. Self-consumption means producing and using the same electricity on-site, and it happens in two ways: sending electricity from solar panels straight to your appliances, and storing electricity in a home battery for later use. There is a narrower definition that counts direct use at the time of generation. Here, self-consumption includes solar electricity stored in a battery and later used on-site.

When you send excess electricity to the grid for credits on your bill and use those credits later, you are not using the actual electricity your panels produced. That is called net metering, and it differs from self-consumption.

Think of a vegetable garden behind the house. Eating the vegetables you just picked is self-consumption. Giving vegetables to a neighbour and later eating theirs is a different kind of exchange.

A maximum self-consumption ratio only means you are using all the electricity you generate with solar on-site. Even so, you may still need to draw some energy from the grid to cover your entire usage.

Going straight or via a battery is self-consumption; going through the grid is another path.
  • Top row: direct use
  • Middle row: battery storage, then use
  • Bottom row: grid export for credits

What decides the self-consumption level?

Most important is the size of the system compared with electricity use, then the timing of use. The main determinant of self-consumption is the relationship between system size and consumption.

Systems smaller than the building's demand have high self-consumption because generation seldom exceeds load. Oversized systems produce more energy than needed, so the excess is exported.

Timing matters too. Self-consumption is higher when loads coincide with daylight hours. Solar panels produce energy mostly during the day when the sun is out, so a home that is empty all day and uses lights only in the evening will find it hard to use the power available.

When generation does not exceed simultaneous load, electricity is used on-site; any surplus can be exported.
  • System smaller than demand
  • System oversized for demand
  • Surplus going to the grid

Why does self-consumption matter?

When exported electricity earns less than the price of imported electricity, on-site use can avoid buying power at the higher price. The result depends on tariffs and equipment costs; this is not a universal tariff rule. Some utility companies are changing the way they offer net metering, and if you are not on a one-to-one rate, you will not be credited the full price. Power produced and used directly reduces what must be bought from the grid. As net metering policies shift, a self-consumption setup may be the key to maximizing your savings.

The same holds for plants that serve an on-site user: power delivered directly to the user can be valued at the sales price rather than the lower wholesale price that applies when delivering energy to the grid.

When export credit is below the import price, direct use can be worth more than export.
  • On-site use: avoids electricity purchases
  • Power sent to the grid: may be valued lower

How can you raise the self-consumption level?

There are three main ways. They are changing your electricity habits, installing a home battery and upgrading your electrical panel to a smart panel.

Change habits. You can run the dishwasher and laundry machine in the middle of the day to use as much electricity directly from the panels as possible. Timers, smart appliances and changed behaviour to run energy-hungry devices while the PV is producing also help.

Install a battery. With a battery, excess electricity produced by the panels during the day is stored on-site to be used later, so a home battery essentially replaces the grid as a bank for extra solar electricity. Batteries store daytime generation for evening use.

A smart panel. This panel helps time and control appliances so they use more solar power.

Shift usage times, add a battery and use a smart panel.
  • Change habits: use power at midday
  • Home battery
  • Smart electrical panel

Real-world example

Picture a hypothetical household with panels on the roof. At midday the panels produce plenty, and the household runs the washing machine right then, using the power directly. The surplus goes into a home battery and is used to cook dinner in the evening. Most of the electricity produced is used at home, and the share sent to the grid is smaller. This is an illustrative model, not data from a particular household.

Common misunderstandings

Sending power to the grid and taking it back is also self-consumption. In that case you are not using the electricity your panels produced, but credits on a bill.

A high self-consumption level means you no longer need the grid. The ratio only shows how much of the electricity you make you use on-site. You may still need to draw some energy from the grid to cover your entire usage.

The bigger the system, the higher the self-consumption. Oversized systems produce more energy than needed, so the excess is exported.

Frequently asked questions

How does solar self-consumption differ from net metering?

Self-consumption is using your own solar electricity on-site, directly or after battery storage. Net metering is sending excess to the grid for credits on a bill, so you are not using that same electricity.

How does a battery help self-consumption?

It stores excess daytime electricity for evening use, replacing the grid as a bank for extra solar electricity.

Can you raise self-consumption without buying a battery?

Yes. Changing habits, such as running the laundry machine in the middle of the day or putting appliances on timers, lets you use more electricity directly from the panels.

Summary

  • Solar self-consumption is using on the spot the electricity your panels just produced, directly or through a battery.
  • System size compared with electricity use, and the timing of use, are the two main factors.
  • Changing habits, installing a battery and using a smart panel are three ways to raise it.

Terms in this article

English and Vietnamese terms, with the meanings used here. Hover, tap or Tab to a term with a dotted underline for an explanation as you read.

self-consumptiontự tiêu thụ
Using your own solar electricity on-site, directly or after battery storage.
net metering
A billing method in which excess electricity sent to the grid is credited on your bill.
self-consumption ratiotỷ lệ tự tiêu thụ
The share of the solar electricity produced that is used on-site.
home batterypin lưu trữ gia đình
A battery that stores the panels' excess daytime electricity for later use.
smart electrical paneltủ điện thông minh
An electrical panel that times and controls appliances so they use more solar power.
gridlưới điện
The shared electricity network a home draws extra power from or sends surplus to.

This article is not marked as viewed

Spotted something wrong or unsafe?

Tell the administrator by email. The message already has the article title and address.

Report this article
  • A sunlit solar farm beside woodland and a reservoir, with distant wind turbines.
    Starter

    What Is Green Energy?

    Distinguish renewable energy from green power through solar and wind examples, while recognising environmental impacts that still matter.

    5 min read
  • A photovoltaic panel in the foreground with a wind turbine behind it under a bright sky.
    Starter

    How Do Solar and Wind Power Generate Electricity?

    Trace sunlight through photovoltaic cells and wind through a rotor and generator, comparing how each technology produces electricity.

    5 min read
  • A hydroelectric dam and spillway in the foreground, with a distant nuclear power station in daylight.
    Starter

    How Do Renewable and Low-Carbon Energy Differ?

    Two labels, two questions: renewable is about supply that nature replenishes, low-carbon about emissions when power is made. Nuclear shows how they differ.

    5 min read
  • An electric motor with exposed copper windings coupled by a shaft to a load device on a laboratory bench.
    Starter

    What Does Energy Conversion Efficiency Mean?

    Efficiency is useful energy divided by total energy in; see where the rest goes as waste heat, with a car, a power plant and a solar cell as examples.

    5 min read
See all articles of the topic

Sources

These sources are written for older readers. If they feel hard, read them with an adult.