How Does Temperature Affect Panel Power?
- Starter
- Article
- Ages 10+
- 5 min read

As a solar cell heats up, its open-circuit voltage falls while its short-circuit current rises only slightly (PVEducation). Because the voltage change is larger, silicon cells lose about 0.4–0.5% of maximum power per °C (PVEducation). A module’s temperature also depends on irradiance, weather and construction (Sandia).
Contents
- Two temperature levels (two thermometers, low and high)
- Power output (two green bars, tall and short)
Why does power fall as a panel heats up?
Heat narrows a semiconductor’s band gap and changes many of its material properties. In a solar cell, open-circuit voltage is affected most and falls as temperature rises (PVEducation). Open-circuit voltage is measured when the cell is not connected to a load.
Short-circuit current rises slightly because the narrower band gap lets more photons create electron–hole pairs (PVEducation). This change is usually smaller than the voltage drop, and the current change also depends on cell design (PVEducation). As a module heats up, the voltage drop lowers its output power (PVEducation).
- Short-circuit current rises slightly as temperature increases (two nearly equal green bars)
- Open-circuit voltage falls as temperature increases (tall then short black bar)
How much power is lost?
For silicon, maximum power falls by about 0.4–0.5% for each additional °C (PVEducation). This is an estimate; cells with higher voltage are usually less sensitive to temperature (PVEducation).
What determines a module’s temperature?
Operating temperature depends on the balance between heat produced by the module, heat lost to the surroundings and ambient temperature (PVEducation). Cell encapsulation changes heat flow into and out of a module, making it run slightly hotter (PVEducation).
Heat leaves by conduction, convection and radiation; the amount depends on materials, surroundings and wind speed (PVEducation). Cell temperature also depends on incident irradiance, air temperature, wind and module construction (Sandia). Wind can increase heat loss through convection, though the cooling effect depends on installation conditions (PVEducation).
- Panel (tilted rectangle)
- Heat and light coming in (yellow arrow)
- Heat carried off by air (three green lines)
Frequently asked questions
Is air temperature the same as cell temperature?
No. Cell temperature also depends on irradiance, wind, weather and module construction (Sandia).
Does current fall as a cell heats up?
Short-circuit current usually rises slightly. The change depends on cell design and is smaller than the change in open-circuit voltage (PVEducation).
Terms in this article
English and Vietnamese terms, with the meanings used here. Hover, tap or Tab to a term with a dotted underline for an explanation as you read.
- open-circuit voltageđiện áp hở mạch
- The voltage of a solar cell when nothing is connected to it as a load.
- maximum powercông suất cực đại
- The greatest power a cell or module delivers under the conditions considered.
- cell temperaturenhiệt độ tế bào
- The real temperature of the cells inside a panel while it is working.
This article is not marked as viewed
Spotted something wrong or unsafe?
Tell the administrator by email. The message already has the article title and address.
More in this topic
StarterWhat Is Green Energy?
Distinguish renewable energy from green power through solar and wind examples, while recognising environmental impacts that still matter.
5 min read
StarterHow Do Solar and Wind Power Generate Electricity?
Trace sunlight through photovoltaic cells and wind through a rotor and generator, comparing how each technology produces electricity.
5 min read
StarterHow Do Renewable and Low-Carbon Energy Differ?
Two labels, two questions: renewable is about supply that nature replenishes, low-carbon about emissions when power is made. Nuclear shows how they differ.
5 min read
StarterWhat Does Energy Conversion Efficiency Mean?
Efficiency is useful energy divided by total energy in; see where the rest goes as waste heat, with a car, a power plant and a solar cell as examples.
5 min read
Sources
These sources are written for older readers. If they feel hard, read them with an adult.
- Effect of Temperature (PVEducation)(opens in a new tab)
PVEducationTier C: other sourcesRead on November 15, 2026
- PV Module Temperature (PVEducation)(opens in a new tab)
PVEducationTier C: other sourcesRead on November 15, 2026
- Cell Temperature (PVPMC, Sandia)(opens in a new tab)
Sandia National LaboratoriesTier A: government, standards or research bodiesRead on November 15, 2026
