How Do Reflective Layers and Cool Roofs Block Radiant Heat?
- Basic
- Article
- Ages 14+
- 5 min read

A cool roof sends sunlight away, so the roof absorbs less heat than a conventional one. A radiant barrier is aluminum foil placed in an air space under the roof; it blocks radiant heat passing from the roof surface to the attic insulation below.
Contents
- Sun
- Light roof
- Attic insulation
- Foil layer under the roof
What you will learn
- Explain why a light roof stays cooler than a dark one in the same sun.
- Describe where a radiant barrier sits and how it blocks heat.
- Name the situations where either method works less well or has a downside.
Before you start
Know that sunlight carries energy and that anything lit by the sun warms up.
What does a cool roof do with sunlight?
It reflects more sunlight and absorbs less. A cool roof absorbs and transfers less heat from the sun to the building than a conventional roof does. The more incoming solar energy a roof reflects, the less it absorbs as heat.
Sunlight delivers a substantial amount of energy. At noon on a clear summer day in the United States, a flat horizontal surface receives about 1,000 W/m² of sunlight. Traditional dark roofs strongly absorb this sunlight, heating both the building and the surrounding air.
- Dark roof: sunlight absorbed, heat goes down
- Light roof: sunlight reflected
How do reflectance and emittance differ?
Reflectance says how much sunlight the roof throws back; emittance says how well the roof sheds heat by itself. They are two separate properties.
High solar reflectance, or albedo, is the most important characteristic for how well a roof reflects the sun's heat away from a building. Whatever the roof does absorb is then given off according to its thermal emittance: the higher it is, the more of the absorbed heat the roof radiates away. Thermal emittance is the efficiency with which a surface cools itself by emitting thermal, or far, infrared radiation, so a cool roof should have both high reflectance and high emittance.
Thermal radiation and sunlight do not overlap in spectrum, so thermal emittance is independent of solar reflectance. A roof can be good at one and poor at the other.
- Reflected sunlight
- Heat the roof gives off
Can a dark roof be a cool roof?
Yes, if it reflects well the part of sunlight the eye cannot see. About half of the sun's energy is invisible near-infrared light, so the color we see tells only part of the story. Cool-colored dark roofs look like traditional dark roofs but reflect near-infrared light better.
The measured effect is large. On a typical summer afternoon:
| Roofs compared | Sunlight reflected | Surface temperature difference |
|---|---|---|
| Cool-colored roof and a traditional roof that looks the same | 35% versus 10% | the cool-colored roof stays about 12°C cooler |
| Clean white roof and a gray roof | 80% versus 20% | the white roof stays about 31°C cooler |
- Traditional dark roof
- Cool-colored dark roof
- White roof
How does a radiant barrier block heat?
It sits between the roof surface and the attic insulation and makes it harder for radiant heat to cross that gap. An attic radiant barrier is aluminum foil placed in an air space to block radiant heat transfer between the roof surface and the attic insulation below.
Radiant heat is heat a surface gives off as thermal infrared radiation. A roof surface heated by the sun gives off heat that way toward the attic beneath it. A radiant barrier depends on the surface property of low infrared emissivity to provide its benefit: a low-emitting surface sends out little heat. As a result, it can significantly lower summer heat transfer to the attic insulation and to the cooling duct system.
- Roof surface, where radiant heat heads down
- Foil layer
- Attic insulation
When do these methods work less well?
Dust and placement affect radiant barriers; cold climates can reduce a cool roof’s year-round benefit.
Radiant barrier. Roof-mounted application is preferred over horizontal application, because a horizontal layer will significantly degrade in performance from eventual dust accumulation. Effective attic ventilation can significantly improve the reduction in heat flow through the ceiling from radiant barriers.
Cool roof. It has a few downsides. In winter, cool roofs increase the need for heating energy in cold climates, although in the United States this penalty is typically small compared to the summer cooling benefit. Glare from a bright white or silvery roof on a low-rise building may disturb occupants of taller neighboring buildings. Ongoing costs may include periodic maintenance to keep the roof clean and maximize its reflectance.
- Foil mounted under the roof
- Foil laid horizontally
- Dust settled on the foil
Real-world example
Picture a small hypothetical house with an attic under a metal roof. If the roof is painted a light color, the roof surface takes in less heat from the sun. If a foil layer is fixed under the roof with an air space between it and the insulation, part of the radiant heat from the roof surface is blocked on its way down. The two layers work at different points along the same path of heat. This is an illustrative model, not a description of a particular building.
Common misunderstandings
A cool roof has to be white. Cool-colored dark roofs also reflect near-infrared light better, so they stay cooler than a traditional dark roof that looks the same.
Foil under the roof only needs to be stuck on. It has to sit in an air space, and roof-mounted placement is preferred over a horizontal layer so that dust does not build up and cut its performance.
A cool roof helps all year round. In cold climates, cool roofs increase the need for heating energy in winter.
Frequently asked questions
What is a cool roof?
A roof that absorbs and transfers less heat from the sun to the building than a conventional roof does, because it reflects more sunlight and sheds heat well.
Where does a radiant barrier go?
In an air space between the roof surface and the attic insulation, and mounted under the roof rather than laid horizontally.
How does a cool roof affect winter?
In cold climates, cool roofs increase the need for heating energy in winter. In the United States this penalty is typically small compared to the summer cooling benefit.
Does a cool roof need cleaning?
It may. Ongoing costs can include periodic maintenance to keep the roof clean and maximize reflectance.
Summary
- Cool roofs reflect sunlight and shed absorbed heat through thermal emission.
- An under-roof radiant barrier reduces radiative transfer with a low-emissivity surface facing an air space.
- Dust, placement and climate affect the practical benefit.
Terms in this article
English and Vietnamese terms, with the meanings used here. Hover, tap or Tab to a term with a dotted underline for an explanation as you read.
- cool roofmái sáng màu
- A roof that absorbs and transfers less heat from the sun to the building than a conventional roof does.
- solar reflectanceđộ phản xạ ánh sáng mặt trời
- How much sunlight a roof reflects; also called albedo, and the higher it is the more solar heat is sent away.
- thermal emittanceđộ phát xạ nhiệt
- The efficiency with which a surface cools itself by emitting thermal infrared radiation.
- near-infrared lighthồng ngoại gần
- The invisible part of sunlight, about half of the sun's energy.
- radiant heatnhiệt bức xạ
- Heat that a surface gives off as thermal infrared radiation.
- radiant barrierlớp phản xạ dưới mái
- Aluminum foil placed in an air space to block radiant heat between the roof surface and the attic insulation.
This article is not marked as viewed
Spotted something wrong or unsafe?
Tell the administrator by email. The message already has the article title and address.
More in this topic
BasicHow Do Strength, Hardness and Ductility Differ?
Tell strength, hardness and ductility apart through yield strength, tensile strength and elastic and plastic deformation to read mechanical properties.
5 min read
BasicWhat Do Tensile and Hardness Tests Measure?
See how a tensile test records force and extension, why results become stress and strain, and what a hardness test derives from the dent of an indenter.
5 min read
BasicHow Do Ashby Charts Help Compare Materials?
Understand how an Ashby chart puts many materials on two properties, why it uses log scales and how sliding an index line picks a material.
5 min read
BasicHow Does Material Selection Go from Needs to Options?
Follow material selection from functional requirement, fixed and free variables to a performance index and a shortlist that still needs checking.
5 min read
Sources
These sources are written for older readers. If they feel hard, read them with an adult.
- Cool Roofs (Heat Island Group)(opens in a new tab)
Lawrence Berkeley National LaboratoryTier A: government, standards or research bodiesRead on November 10, 2026
- Using Cool Roofs to Reduce Heat Islands(opens in a new tab)
U.S. Environmental Protection AgencyTier A: government, standards or research bodiesRead on November 10, 2026
- FPC Residential Monitoring Project: New Technology Development - Radiant Barrier Pilot Project (FSEC-CR-1231-01)(opens in a new tab)
Florida Solar Energy Center, University of Central FloridaTier A: government, standards or research bodiesRead on November 10, 2026
