Skip to content
LSLab

How Are Carrier Generation and Recombination Related?

  • Starter
  • Article
  • Ages 10+
  • 5 min read
A dark blue solar cell on a test stage beneath a simulator lamp, with a test clip attached at the right edge.

Light can create extra electrons and holes when a semiconductor absorbs photons [https://www.pveducation.org/pvcdrom/pn-junctions/generation-rate]. Recombination removes both carriers: an electron falls into a hole and gives up energy as heat or light [https://www.pveducation.org/pvcdrom/pn-junctions/recombination]. When the light stops, excess carriers decay back to the equilibrium concentration through recombination [https://www.pveducation.org/pvcdrom/pn-junctions/minority-carrier-lifetime].

Contents
Three yellow arrows point down at a rectangular slab; to its right are a green dot, an empty ring and a red star.
  • Light (three yellow arrows)
  • Semiconductor (rectangle)
  • Electron (solid dot)
  • Hole (empty ring)
  • Recombination (red star)

What you will learn

  • Describe how photons create electrons and holes.
  • Explain what happens when an electron recombines with a hole.
  • Say why the excess carrier count falls when the light source stops.

Before you start

A semiconductor has charged electrons and holes. A hole is an empty state in the valence band that an electron can move into [https://www.pveducation.org/pvcdrom/pn-junctions/types-of-recombination]. Other terms are explained as they come up.

How does carrier generation create electrons and holes?

When a semiconductor absorbs a photon, it creates an electron-hole pair [https://www.pveducation.org/pvcdrom/pn-junctions/generation-rate]. The generation rate counts the electrons produced at each point in the device through photon absorption [https://www.pveducation.org/pvcdrom/pn-junctions/generation-rate]. In a solar cell, most light is absorbed near the front surface, where carrier generation is highest [https://www.pveducation.org/pvcdrom/pn-junctions/generation-rate].

A semiconductor still has carriers in the dark. The number of carriers in the conduction and valence bands with no external voltage applied is called the equilibrium carrier concentration [https://www.pveducation.org/pvcdrom/pn-junctions/equilibrium-carrier-concentration]. When light creates extra pairs, the count rises above equilibrium; the added carriers are called excess carriers [https://www.pveducation.org/pvcdrom/pn-junctions/minority-carrier-lifetime].

How does recombination make electrons and holes disappear?

An electron in the conduction band can move to a lower energy position in the valence band [https://www.pveducation.org/pvcdrom/pn-junctions/types-of-recombination]. When it enters an empty state, a hole disappears with it [https://www.pveducation.org/pvcdrom/pn-junctions/types-of-recombination]. This process is called recombination, the opposite of generation [https://www.pveducation.org/pvcdrom/pn-junctions/recombination].

Two horizontal bands. A green dot sits on the upper band; a black arrow points down to an empty ring on the lower band, beside a red zigzag.
  • Conduction band (upper band)
  • Valence band (lower band)
  • Electron (solid dot)
  • Hole (empty ring)
  • Electron dropping (black arrow)
  • Energy given off (red zigzag)

During recombination, the electron gives up energy as heat or light [https://www.pveducation.org/pvcdrom/pn-junctions/recombination]. An LED produces light through radiative recombination [https://www.pveducation.org/pvcdrom/pn-junctions/types-of-recombination].

What happens to excess carriers when the light stops?

The recombination rate depends on the concentration of excess minority carriers [https://www.pveducation.org/pvcdrom/pn-junctions/minority-carrier-lifetime]. When no excess carriers remain, the recombination rate is zero [https://www.pveducation.org/pvcdrom/pn-junctions/minority-carrier-lifetime]. When an excitation such as sunlight stops, excess carriers decay back to equilibrium through recombination [https://www.pveducation.org/pvcdrom/pn-junctions/minority-carrier-lifetime].

A rectangular tank holds green water; a yellow stream enters from above, a red stream leaves to the right, and a dashed line crosses the water surface.
  • Tap (generation)
  • Tank (the semiconductor)
  • Water (number of carriers)
  • Drain pipe (recombination)
  • Water level (dashed line)

In the diagram's analogy, the tap stands for carrier generation, the drain for recombination and the water level for the amount of excess carriers.

Real-world example

In a silicon solar cell, most carriers are generated near the front surface, where most light is absorbed [https://www.pveducation.org/pvcdrom/pn-junctions/generation-rate]. As light falls, the generation rate falls; excess carriers return to equilibrium through recombination [https://www.pveducation.org/pvcdrom/pn-junctions/minority-carrier-lifetime].

Common misunderstandings

Recombination only wastes energy. In an LED, radiative recombination releases a photon of light [https://www.pveducation.org/pvcdrom/pn-junctions/types-of-recombination].

Switching off the light removes all carriers. Excess carriers decay to equilibrium, and a semiconductor still has equilibrium carriers in the dark [https://www.pveducation.org/pvcdrom/pn-junctions/minority-carrier-lifetime] [https://www.pveducation.org/pvcdrom/pn-junctions/equilibrium-carrier-concentration].

Only an electric current can generate carriers. A material also creates electron-hole pairs when it absorbs photons [https://www.pveducation.org/pvcdrom/pn-junctions/generation-rate].

Frequently asked questions

Why does an LED glow?

Electrons recombine with holes and release photons; this is radiative recombination [https://www.pveducation.org/pvcdrom/pn-junctions/types-of-recombination].

Does a semiconductor have carriers in the dark?

Yes. It retains its equilibrium carrier concentration when no external voltage is applied [https://www.pveducation.org/pvcdrom/pn-junctions/equilibrium-carrier-concentration].

Where do excess carriers go when the light is switched off?

They decay back to equilibrium through recombination [https://www.pveducation.org/pvcdrom/pn-junctions/minority-carrier-lifetime].

Terms in this article

English and Vietnamese terms, with the meanings used here. Hover, tap or Tab to a term with a dotted underline for an explanation as you read.

carrier generationsinh hạt tải
The process that creates extra free electrons and holes in a semiconductor, for example when the material absorbs light.
recombinationtái hợp
The process in which an electron falls into a hole, so both disappear and the energy is given up.
holelỗ trống
The empty place an electron leaves in the valence band, which behaves like a positive charge carrier.
equilibrium carrier concentrationnồng độ hạt tải cân bằng
The number of carriers in the conduction and valence bands when no outside voltage is applied.

This article is not marked as viewed

Spotted something wrong or unsafe?

Tell the administrator by email. The message already has the article title and address.

Report this article
See all articles of the topic

Sources

These sources are written for older readers. If they feel hard, read them with an adult.