Skip to content
LSLab

How Do Electric Fields Affect Electrons and Holes?

  • Starter
  • Article
  • Ages 10+
  • 6 min read
An iridescent silicon wafer held by gloved hands in a cleanroom.

An electric field pushes electrons and holes in opposite directions: electrons against the field, holes along it. That net movement is called drift, and the current made by carriers moving in an electric field is the drift current. Both kinds of carrier contribute to it, even though they move opposite ways.

Contents
With the electric field pointing right, the electron is pushed left and the hole is pushed right.
  • Electric field (long arrow pointing right)
  • Electron (solid dot with a minus sign)
  • Direction the electron drifts (arrow to the left)
  • Hole (hollow ring with a plus sign)
  • Direction the hole drifts (arrow to the right)
  • Semiconductor bar (rectangular frame)

What you will learn

Before you start

You only need to know that a semiconductor has charged particles moving through it. The two kinds, electrons and holes, are mentioned right below.

How do carriers move when there is no electric field?

Carriers move at random: they cover a distance and then change direction. With no electric field, carriers move a certain distance at a constant velocity in a random direction. An electron just jumps around without covering any net distance.

With a field the path is still random. Carriers keep their random motion and thermal velocity, and on top of that they move in a net direction. In a typical semiconductor the field has only a very minor effect on the random movement.

With no field the random path stays around one spot. With a field the path is still random but slowly shifts to one side.
  • Frame with no electric field (left frame)
  • Random path that ends near its start
  • Frame with an electric field (right frame)
  • Random path that gradually shifts to the right
  • Net distance moved in the end (long arrow)

Which way does an electric field push electrons and holes?

Electrons are pushed against the field and holes along it. Electrons move in the net direction opposite to the electric field and holes in the net direction of the field. The reason for electrons is that they have a negative charge, so they tend to move opposite to the field.

When the field is turned on, electrons and holes drift in opposite directions. Transport caused by carriers moving under an electric field is called drift transport. It occurs not only in semiconductors but also in metals.

How fast do carriers go? Free charge carriers have a drift velocity, an average speed at which they travel through the material. The mobility of carriers is the ratio of drift velocity to the electric-field strength, and it differs between semiconductor materials.

Why do both carriers contribute to the drift current?

Because carriers moving in an electric field make a current, and the material has both kinds. The movement of charge carriers in an electric field results in an electric current. The same conditions hold for the mobility and conductivity of holes as for electrons, so the total conductivity includes both.

The one-dimensional drift equation shows the same thing: it has terms for the concentration and the mobility of both electrons and holes. The conductivity of a material is directly related to the mobility. So when the concentrations of the two kinds are equal, the more mobile kind contributes more.

The two carriers move in opposite directions, yet both contribute to the same current.
  • Semiconductor bar (rectangular frame)
  • Electron moving left (solid dot, left arrow)
  • Hole moving right (hollow ring, right arrow)
  • Contribution of each carrier (two thin lines running down)
  • Total drift current (long coloured bar)

Real-world example

Picture a crowd in a big hall with a very gently sloping floor. Everyone wanders about, bumps into others and keeps changing direction. After a while, though, the whole crowd has shifted towards the low end of the floor, even though nobody meant to go there. The crowd stands for the carriers and the slope for the electric field. This is only an analogy: charge carriers have no intentions, and the two kinds in a semiconductor are pushed against each other rather than towards the same side.

Common misunderstandings

A field makes carriers run in a straight line. Their paths stay random; the field only shifts them gradually to one side.

Only electrons make current in a semiconductor. Holes contribute to the total conductivity too.

Drift exists only in semiconductors. Drift transport occurs in metals as well.

Frequently asked questions

Which way do electrons drift compared with the electric field?

Against it, because electrons have a negative charge.

Which way do holes drift?

Along the field.

What is mobility?

It is the ratio of drift velocity to the electric-field strength. It differs between semiconductor materials.

Summary

  • Electrons drift against the electric field and holes along it.
  • A field shifts the random path of a carrier gradually to one side.
  • Both kinds of carrier contribute to the drift current and the total conductivity.

Terms in this article

English and Vietnamese terms, with the meanings used here. Hover, tap or Tab to a term with a dotted underline for an explanation as you read.

electric fieldđiện trường
A region where a charged particle feels a push or pull; it pushes electrons and holes in opposite directions.
electron
A negatively charged carrier in a semiconductor that drifts against the electric field.
holelỗ trống
A kind of charge carrier in a semiconductor that drifts along the electric field.
drift currentdòng điện trôi
The current made by charge carriers moving under an applied electric field.
mobilityđộ linh động
A quantity that characterises the net movement of carriers in an electric field; it differs between materials.

This article is not marked as viewed

Spotted something wrong or unsafe?

Tell the administrator by email. The message already has the article title and address.

Report this article
See all articles of the topic

Sources

These sources are written for older readers. If they feel hard, read them with an adult.