Skip to content
LSLab

How Does Thermal Mass Delay and Soften Heat Swings?

  • Intermediate
  • Article
  • Ages 16+
  • 2 min read
A room with an exposed red brick wall, dark stone floor, large window and wooden chair, with sunlight falling on the wall and floor.

Thermal mass refers to building material that can absorb, store and release heat. Concrete, stone, brick and tile are commonly used because they have high specific heat capacity and density.

Contents

Time lag is when the response at a wall's inner surface follows a change in outdoor temperature. As heat moves through a massive wall, night heat loss and daytime heat gain partly cancel, so the inner surface swings less and may stay within the comfort band.

The upper red line swings strongly; the lower green line swings less and sits farther to the right.
  • Outdoor temperature (strongly swinging red line)
  • Massive wall (rectangular band)
  • Indoor temperature (gentler green line, shifted later)

How does thermal mass take in and release heat?

In winter, thermal mass absorbs direct sunlight and releases the heat gradually at night. In summer, it can absorb warmth from the air and help cool a home; heat leaves the mass only when the surrounding air is cooler than the material.

A large rectangle sits in the center; a red arrow points in from the left and a yellow arrow points out on the right.
  • Thermal mass (large rectangular block)
  • Warmer air: heat flows into the block (red arrow)
  • Cooler air: heat flows out of the block (yellow arrow)

What conditions shape its effect?

Heat transfer between the mass and air needs a temperature difference: warmer air transfers heat into the mass, and cooler air draws heat out. If the daily indoor-air cycle does not move through both sides of the indoor mass temperature, the mass has little effect on daily heat transfer through the building envelope.

For exterior mass, the strategy works best when the day-night outdoor temperature swing is large but still crosses the comfort zone. It can reduce peak conditioning demand; minimum conditioning demand may also rise.

Interior thermal mass is particularly useful in spaces with significant solar gain, where it can damp peak conditioning loads or temperature variations.

In passive solar heating design, glass area and effective thermal mass do not scale at the same rate: doubling the glass area may require tripling the effective thermal mass. The required glass area, insulation, shading and thermal mass depend on climate.

A narrow rectangle and angular red line are on the left; a wider rectangle and angular green line are on the right.
  • Light (thin) wall and a strong swing inside (red line)
  • Heavy (thick) wall and a gentle swing inside (green line)

Terms in this article

English and Vietnamese terms, with the meanings used here. Hover, tap or Tab to a term with a dotted underline for an explanation as you read.

thermal masskhối lượng nhiệt
Building material that can absorb, store and release heat.
time lagđộ trễ
The delay between an outdoor temperature change and the response indoors.
specific heat capacitynhiệt dung riêng
The heat needed to warm one unit of mass of a material by one degree.
comfort bandvùng thoải mái
The range of temperature in which people in a room feel comfortable.

This article is not marked as viewed

Spotted something wrong or unsafe?

Tell the administrator by email. The message already has the article title and address.

Report this article
See all articles of the topic

Sources

These sources are written for older readers. If they feel hard, read them with an adult.