Skip to content
LSLab

How Do Microcontrollers and Microprocessors Differ?

  • Starter
  • Article
  • Ages 10+
  • 6 min read
A microprocessor board with separate memory chips beside a compact microcontroller board.

A microprocessor typically needs external memory to form a complete system. A microcontroller integrates a processing core, memory and peripherals on one chip, making it convenient for device control. This is a typical distinction, rather than an absolute boundary that applies to every chip.

Contents
A laptop uses a microprocessor; a washing machine uses a microcontroller.
  • Laptop: microprocessor
  • Washing machine: microcontroller

What you will learn

Before you start

No prior knowledge needed. It is enough to know that a washing machine or a computer has a processing part inside.

What does each chip contain?

In a simplified model, a microprocessor focuses on processing, while a microcontroller integrates memory and peripherals as well. A microprocessor is a central processing unit (CPU) on a single integrated circuit. In this typical comparison, a microprocessor depends on external chips for memory and peripherals. The simplified model does not mean every microprocessor contains only a CPU.

Picture a kitchen. A microprocessor is a skilled cook who needs the fridge, the pantry and the stove in other places. A microcontroller is a small food truck: the cook, the stove and the fridge share one vehicle.

A microcontroller includes on-chip RAM, ROM (or flash memory) and peripherals such as timers, analog-to-digital converters (ADCs) and communication interfaces. This all-in-one design reduces complexity, cost and power consumption.

Typical model: a microprocessor needs external memory; a microcontroller integrates memory and peripherals.
  • Microprocessor: CPU core in a simplified model
  • Memory and ports on outside chips
  • Microcontroller: integrated CPU, memory and peripherals
  • Blocks inside: core, memory, timer, ADC

How do they differ in power, electricity and cost?

Typically, microprocessor systems target larger software workloads, while microcontroller systems prioritize compact, low-power control. Computing capability, power use and price still need comparison for the specific devices and operating modes. Microprocessors can handle multitasking and run sophisticated operating systems. The clock speeds of microcontrollers typically range from a few kilohertz to a few hundred megahertz, and they typically execute predefined, repetitive tasks.

On power, a microprocessor consumes significantly more and often needs a fan or heat sink. A microcontroller is engineered for low power usage, often at the level of milliwatts or microwatts. On price, microcontrollers often cost just a few dollars or less, while a microprocessor is more expensive and a working system around it needs extra investment in memory, storage and peripherals.

CriterionMicroprocessorMicrocontroller
On the chipCPU-centered, typically needs external memoryCPU, memory, input/output ports
Typical jobLarge software, many tasks at oncePredefined, repetitive tasks
Power useHigh, often needs coolingLow, often milliwatts or microwatts
CostHigher, needs extra partsLow, often a few dollars or less

The two are complementary technologies, each tailored to different needs.

Typical comparative trends, not measured values or a rule for every chip.
  • Microprocessor (solid teal bar)
  • Microcontroller (amber outlined bar)
  • Speed, power use, cost (top to bottom)

What does a microcontroller do inside a device?

It reads data from a sensor, processes it and drives an output part, all on one chip. Take a thermostat: a microcontroller might read temperature data from a sensor via an ADC, process it and adjust a heater using PWM (pulse-width modulation).

Those three steps run one after another, again and again:

  1. The ADC reads the temperature the sensor delivers.
  2. The processing core compares that temperature with the level the user set.
  3. The PWM block turns the heater up or down.

The processing blocks of this loop can sit on the microcontroller; the sensor and a power stage to supply the heater remain external. PWM is a control signal, not the power supply for the heater. Microcontrollers dominate embedded systems, where cost, size and power efficiency matter more than computing power.

Thermostat signal flow; the external power stage supplying the heater is not shown.
  • Temperature sensor
  • ADC: reads the sensor
  • Processing core
  • PWM: adjusts the heater
  • Heater

Real-world example

Compare a laptop with a hypothetical washing machine. The laptop runs many programs at once and needs a lot of memory, so it uses a microprocessor plus separate memory chips. The washing machine only reads buttons, counts time and switches the motor on and off, so one cheap microcontroller is enough. Microwaves and washing machines are among the home appliances that use microcontrollers, and smartphones and tablets are among the devices that use microprocessors. This is an illustrative model, not a description of a particular product.

Common misunderstandings

A microcontroller is just a shrunken microprocessor. A microcontroller adds memory and input/output ports on the same chip, while a microprocessor system typically needs external memory.

A stronger chip is always the better choice. For a fixed job such as running a washing machine, a stronger chip only makes the device costlier and hungrier for power. Each type suits its own need.

Frequently asked questions

Does a microcontroller contain a microprocessor?

It contains a processing core. The microcontroller joins that core with memory and input/output ports, so it can do a whole job without many companion chips.

Does a smartphone use a microprocessor or a microcontroller?

Smartphones and tablets are among the devices that use microprocessors.

Can a microcontroller run a large operating system like a computer?

Usually not, because microcontrollers typically do predefined, repetitive tasks. Sophisticated operating systems are the job of a microprocessor.

Summary

Terms in this article

English and Vietnamese terms, with the meanings used here. Hover, tap or Tab to a term with a dotted underline for an explanation as you read.

microcontrollervi điều khiển
A single chip that holds a processor core, memory and input/output ports, used to control a device.
microprocessorbộ vi xử lý
A processor chip that typically requires external memory to form a complete system.
central processing unitCPU
The central processing unit, the part that runs a program's instructions.
analog-to-digital converterbộ chuyển đổi tương tự sang số
A block on a microcontroller that helps read data from a sensor.
pulse-width modulationđiều chế độ rộng xung
A method a microcontroller uses to adjust an output device, such as a heater.

This article is not marked as viewed

Spotted something wrong or unsafe?

Tell the administrator by email. The message already has the article title and address.

Report this article
  • Macro view of a metal-pinned chip on a teal circuit board with small components behind it.
    Starter

    What Is a Microchip?

    Understand microchips, transistors and chip packages through a phone example, and distinguish a semiconductor material from a finished circuit.

    5 min read
  • An opened chip package revealing a silicon die and fine gold bond wires inside ceramic housing.
    Starter

    What Is Inside a Microchip?

    Explore the semiconductor base, transistors and chip package, and see how these parts form a component used in electronic devices.

    5 min read
  • An oscilloscope showing a high-low rectangular pulse beside a digital circuit board.
    Starter

    How Do Voltage Levels Represent Digital Signals?

    See how chips read HIGH and LOW from voltage, how logic families set thresholds, and how a transistor switch flips a level.

    5 min read
  • An exposed memory chip die with fine circuit regions and a row of gold wire-bond contacts on a board.
    Starter

    How Do Bits, Bytes and Machine Words Differ?

    Compare bits, nibbles, bytes and machine words by length, and understand why a byte has a fixed size while word length depends on the design.

    5 min read
See all articles of the topic

Sources

These sources are written for older readers. If they feel hard, read them with an adult.