Skip to content
LSLab

How Do Diffusion and Drift Differ?

  • Starter
  • Article
  • Ages 10+
  • 4 min read
A small diode mounted on a green circuit board between two metal probes.

Diffusion and drift are two ways charge carriers move through a semiconductor. Diffusion happens when particles jostle at random and gradually spread from a crowded place to a sparse one. Drift is the average motion caused by an electric field; electrons and holes drift in opposite directions. One needs an uneven crowd, the other needs a field.

Contents
The left arrows show net spreading from a dense cluster; the right arrow shows average drift of one carrier type, not every particle’s path.
  • Dense cluster of particles
  • Three spreading arrows
  • Row of particles between plates
  • Plates and the arrow giving the direction

What you will learn

  • Explain what diffusion is and why particles spread from crowded to sparse places.
  • Describe the drift that an electric field causes.
  • Compare the two kinds of motion and see where they meet at a p-n junction.

Before you start

You only need to know that charge carriers are electrons and holes. If you have not met them yet, the article recalls them.

What is diffusion?

Diffusion is the process by which molecules intermingle as a result of their kinetic energy of random motion. Picture two containers of gas separated by a partition. Remove the partition and the gases mix because their molecules move at random velocities, and in time a uniform mixture forms.

Nobody pushes them. Each particle wanders aimlessly, and because the crowded side holds more particles, more of them end up crossing to the sparse side. Charge carriers in a semiconductor diffuse the same way, as the last section shows.

The arrow shows net transport from high to low concentration; individual particles still move randomly in many directions.
  • Crowded box
  • Sparse box
  • Direction the particles spread

What is drift?

Drift is an average directed motion caused by an electric field, superimposed on random motion. An applied electric field superimposes a small drift velocity on the free electrons in a metal.

Electrons drift opposite to the electric field and holes drift along it. A shared direction therefore describes the average motion of one carrier type, rather than every particle moving together.

"Small" matters here. In the metal example, for ordinary currents the drift velocity is on the order of millimeters per second, while the electrons themselves move at about a million meters per second. The particles still dash around at random. The field adds only a slight lean to one side.

In an intrinsic semiconductor, applying a voltage lets both the electron and the hole contribute to a small current.

The arrow shows the average drift direction of one carrier type; the zigzag reminds us that random motion continues.
  • Two plates making the field
  • Row of particles
  • Arrow for the drift direction
  • Zigzag line of the random motion

How do the two differ?

They differ in what causes the motion. Diffusion comes from a difference in how crowded the particles are; drift comes from an electric field.

CriterionDiffusionDrift
CauseUneven spread of particles, random motionAn applied electric field
Needs an electric fieldNot requiredYes, including a field built into the material
Average directionFrom high to low concentration of the same carrier typeElectrons opposite the field, holes along it

Where do the two meet?

They meet at a p-n junction, where p-type semiconductor touches n-type. Near the junction, electrons diffuse across to combine with holes and create a depletion region.

The process does not run forever. A space charge builds up in the depletion region and inhibits any further electron transfer unless a forward bias helps. This inhibits net transfer rather than stopping every carrier. A field forms inside the junction even without an external voltage. At equilibrium, drift and diffusion currents oppose and balance each other, giving zero net current.

The lower arrow shows electron diffusion from n to p; the upper arrow shows electron drift in the opposite direction. At equilibrium the two currents balance.
  • p side: the holes
  • n side: the electrons
  • Depletion region in the middle
  • Direction the electrons diffuse
  • Electron drift, opposite to diffusion

Real-world example

Drop a bead of ink into a still glass of water. The ink spreads from the dark spot into the pale water with no one stirring: that is diffusion. Put a leaf on a river and the current carries it one way: that is a picture of drift. These are illustrations only; real charge carriers do not flow like water.

Common misunderstandings

Diffusion needs a voltage. It does not. It needs only an uneven spread of particles and random motion.

Drift velocity is how fast electrons run. In the metal example, the drift velocity is only about millimeters per second, while the electrons move far faster on their own.

Only electrons add to the current. Under a voltage, holes add to it as well.

Frequently asked questions

Where does diffusion happen in a semiconductor?

A typical place is the p-n junction, where electrons diffuse toward the side that has holes.

What does drift need?

An electric field; an externally applied voltage is not essential, because a p-n junction develops its own internal field. The field adds a small drift velocity to the random motion of the particles.

Do holes add to the current?

Yes. When a voltage is applied to an intrinsic semiconductor, both the electron and the hole can contribute to a small current.

Summary

  • Diffusion produces net transport from high to low concentration of the same carrier type.
  • A field causes drift: electrons move against the field, holes along it.
  • At an equilibrium p-n junction, drift and diffusion currents balance without an external voltage.

Terms in this article

English and Vietnamese terms, with the meanings used here. Hover, tap or Tab to a term with a dotted underline for an explanation as you read.

diffusionkhuếch tán
The process in which particles mix through random motion, so that they spread out through the space available.
driftchuyển động trôi
The slow movement in one common direction that an electric field adds on top of the random motion of charged particles.
charge carrierhạt tải
A charged particle that moves through a material and makes up an electric current; in a semiconductor these are electrons and holes.
holelỗ trống
A missing electron in the crystal lattice; under a voltage it also adds to the current.
electric fieldđiện trường
An electric field exerts force on charges. Electrons drift against it and holes along it; a field can form internally at a junction.
depletion regionvùng nghèo
A region near a p-n junction with few free carriers; ion charge creates a field opposing net diffusion. Drift and diffusion currents balance at equilibrium.

This article is not marked as viewed

Spotted something wrong or unsafe?

Tell the administrator by email. The message already has the article title and address.

Report this article
See all articles of the topic

Sources

These sources are written for older readers. If they feel hard, read them with an adult.