Skip to content
LSLab

How Do Recycling Rate and Purity Differ?

  • Starter
  • Article
  • Ages 10+
  • 5 min read
A black conveyor carries brown cardboard, white paper, clear plastic bottles and silver cans through a facility with blue machinery.

The U.S. EPA has a voluntary method for calculating the municipal solid waste recycling rate: the mass recycled compared with the total mass generated in a state or locality (EPA methodology). The rate measures quantity in tons; it does not show whether the material stream contains contaminants (EPA).

Contents
A diagram shows a row of ten squares, four filled green and six empty, with two colored lines below.
  • Waste generated (row of squares; green ones are recycled)
  • Recycled share (thick green line)
  • Disposed share (thin grey line)

What does the recycling rate measure?

In the EPA method, the percentage is the mass of municipal solid waste recycled divided by the total generated. The total includes waste recycled and disposed of within the same state or locality; imported waste is excluded, while exported material is included (EPA). Quantities are reported in tons (EPA).

This is a voluntary EPA method, not a single calculation used everywhere. States and localities define recycling, choose materials and calculate rates in different ways, so comparisons need care (EPA).

What do purity and contamination tell you?

Here, purity describes how much unwanted material is mixed into a stream. The recycling-rate equation weighs material, so it does not measure contamination (EPA). Items a local program does not accept can contaminate the recycling stream, and an entire contaminated load may be discarded (EPA).

For paper or cardboard food containers, scrape or rinse off food residue. They can be recycled when they are clean enough to scrape with a spatula; otherwise, they cannot (EPA). Rules for other materials depend on the local recycling program (EPA).

Two rectangles contain green circles; the one on the right also has two red triangles.
  • Two rectangles: green dots on the left, green dots mixed with red triangles on the right
  • Green line below the left rectangle
  • Red line below the right rectangle

Why can the two measures differ?

Weight tells how much material was recovered; contamination tells whether unwanted items are mixed in. One stream can weigh more but contain more contaminants, while another can weigh less and be cleaner. This is an illustration, not data from a particular recycling facility.

The left rectangle has green dots and red triangles above a long green bar; the right has green dots above a shorter bar.
  • A lot recovered but heavily mixed (bale with many red triangles, long bar)
  • Less recovered but clean (all-green bale, short bar)
  • Short green bar below the right rectangle

Frequently asked questions

Does a high recycling rate mean cleaner material?

Not necessarily. The EPA rate is based on weight, while items a program does not accept can contaminate the stream (EPA, EPA).

Can food-soiled paper containers be recycled?

They can if the food residue is scraped or rinsed off until the container is spatula-clean; otherwise, they cannot (EPA).

Terms in this article

English and Vietnamese terms, with the meanings used here. Hover, tap or Tab to a term with a dotted underline for an explanation as you read.

recovery ratetỷ lệ thu hồi
The percentage of waste sent for recycling compared with all the waste generated, counted by weight.
purityđộ tinh sạch
How far the recovered material is the right kind, with no junk mixed in.
contaminationtạp nhiễm
Wrong or non-recyclable items mixed into the recycling stream.

This article is not marked as viewed

Spotted something wrong or unsafe?

Tell the administrator by email. The message already has the article title and address.

Report this article
  • A sorting conveyor directing paper, plastic bottles and metal cans toward recovery channels.
    Starter

    How Is Waste Sorted?

    Follow sorting from the point of disposal to a materials recovery facility, and understand why local acceptance rules come before bin choice.

    6 min read
  • Clean cardboard, a glass jar, a plastic bottle and an aluminium can arranged on a light surface.
    Starter

    Which Materials Can Be Recycled?

    Compare paper, plastic, glass and aluminium, distinguishing technical recyclability from acceptance by a local collection programme.

    5 min read
  • A cloth grocery tote, metal bottle and glass jar beside a recycling caddy with cans and paper.
    Starter

    How Do Reduction, Reuse and Recycling Differ?

    Reduction prevents waste, reuse keeps an item in use and recycling turns used items into raw materials. See how the three differ and which comes first.

    5 min read
  • Used aluminum cans on a sorting conveyor beside a compacted bale at a recycling facility.
    Starter

    How Do Closed-Loop and Open-Loop Recycling Differ?

    Closed loops make the same kind of product again; open loops make something different and lesser. Compare the two and see why material quality decides.

    6 min read
See all articles of the topic

Sources

These sources are written for older readers. If they feel hard, read them with an adult.